To subscribe to the CRTOS blog using your RSS newsreader or active bookmarks, paste the following link into your program. Some programs will allow you to subscribe simply by clicking or right-clicking on the link and choosing the "subscribe to this feed" option.
Here?s the left-side "junk drawer" in place, with the new buttons for trap selection. The lower group are for pedal, the upper group for accompaniment. The keycheek buttons have been mounted in their overlay panels, but the cheeks must be routed deeper to allow clearance for the wiring.
Every one of the wires (shown hanging over the side of the console in the previous picture) have to be traced out and identified. Then, they are bundled in groups of 8 and tagged to identify the connector on the Uniflex boards to which they will attach.
Everything that will not be reused has been stripped from the console. The manuals will be removed next, to make it easier to work on the console shell.